| MR Arthrogram Shoulder Direct After FL | IMG12958 | |
| Machine Model: | Ortho Titan, OSMI Sola |
Generated:
2023-08-23 09:26:07
|
|
1
|
2 *
|
3 **
|
4 **
|
5
|
|
| Plane | Axial | Coronal Oblique | Sagittal Oblique | Sagittal Oblique | Sagittal Oblique |
| Sequence | IW FS TSE | IW FS TSE | IW FS TSE | T1 TSE | Fast T1 TSE |
| Timing | --- | --- | --- | --- | --- |
| Thickness - Spacing | 3 mm - 0.6 mm | 3 mm - 0.6 mm | 3 mm - 0.6 mm | 4 mm - 1 mm | 5 mm - 2 mm |
| FOV | approx. 160-180mm | approx. 160-180mm | approx. 160-180mm | approx. 160-180mm | approx. 160-180mm |
|
6
|
|
7
|
8 ***
|
9 ****
|
|
| Plane | Radial (24 slices) | Coronal Oblique | Axial | Sagittal Oblique | |
| Sequence | IW FS TSE | T1 TSE FS | T1 FS TSE | T1 TSE FS | |
| Timing | --- | --- | --- | --- | |
| Thickness - Spacing | 1.7 mm - mm | 3 mm - 0.6 mm | 3 mm - 0.6 mm | 4 mm - 1 mm | |
| FOV | approx.140-160mm | approx. 160-180mm | approx. 160-180mm | approx. 160-180mm |
| Special Instructions: |
|
|
| * Align coronal oblique series parallel with distal supraspinatus tendon |
| ** Align sagittal oblique series perpendicular to distal supraspinatus tendon |
| *** include for Labral tear |
| **** Include for Post OP |
| Indications: dislocation , limited range of motion , shoulder crepitus , shoulder pain |
If metal is in the area of interest or near enough for artifact to effect it:
- if option is available, use WARP option with VAT @ at least 50% (can go higher for larger implants)
- Use a high receiver bandwidth (approx. 500 Hz/pixel)
- for T1 or PD-weighted fat-saturated sequences, turn off all fat-saturation
- for T2-weighted fat-saturated sequences, substitute in STIR sequences with the same geometric parameters; STIR sequences must be performed pre-contrast due to the possibility of contrast-enhancing areas being nulled due to the short inversion time
 |
 |
 |
 |
